Articles in Referred Journals and Transactions

 

 

1.       H. Luo, C. Hao, J. Zhang, Z. Gan, and H. Zhang, 2010: Characteristics of Resistance Welding Magnesium Alloys AZ31 and AZ91, submitted to Welding Journal, May 2010.

2.       A. Shayan, H. Zhang, and Z. Gan, 2010: Quality Test of AHSS Steel Spot Welds Using Ultrasonic Technique, submitted to J. of Manuf. Sci & Engg., April 2010.

3.       H. Zhang, Y. Zeng, H. Zhang, and Q. Weng, 2009: Effective Properties of Interpenetrating Bi-phase Composites with Network Structure as Reinforcement Phase, J. Composite Materials, submitted.

4.       Y. Zeng, H. Zhang, H. Zhang, and Z. Hu, 2009: Effective Permittivity Calculation of Composites with Interpenetrating Phases, J. Composite Materials, submitted.

5.       H. Zhang, Y. Zeng, H. Zhang, and F. Guo, 2009: Computational Investigation of the Effective Thermal Conductivity of Interpenetrating Network Composites, J. Composite Materials, accepted.

6.       X. WANG, Y. Zhong, B. WANG, and H. Zhang，2009： Positron lifetime and Doppler broadening study of defects in hydrogen charged Al-Mg alloys，J. Mater. Sci. Tech.，Vol.24 (2009) 1791-1794.

7.       Z. Li, C. Hao, J. Zhang and H. Zhang, 2007: Effects of Sheet Surface Conditions on Electrode Life in Aluminum Welding, Welding Journal, vol. 86 (4), pp. 34-s to 39-s.

8.       C. Huang, L. Ma, Z. Chen, S. Wang, X. Wang, and H. Zhang, 2007: A Study of Mg Aggregation in AA5754 Alloys by Positron Annihilation Spectroscopy, 2007 Chinese Phys. Lett. 24 546-548  

9.       X. Wang, H. Zhang, and A. Sun, 2007: Influence of Vacancy Formation and Mg Migration on Cracking in Spot Welding AA5754 Alloys, Materials Science Forum, Vol. 539-43 (1), pp. 433-437 .

10.   H. Zhang, J. Zhang, and H. Zhang, 2006: Computation of Radar Absorbing Silicon Carbide Foams and Their Silica Matrix Composites, Computational Materials Science, Vol. 38/4, pp. 857-864.

11.   H. Zhang, J. Zhang, and H. Zhang, 2006: Electromagnetic Properties of Silicon Carbide Foams and Their Composites with Silicon Oxide as Matrix in X-band, Composites, Part A: Applied Science and Manufacturing, Volume 38 Issue 2 (2006) 602-608.

12.   A. Shayan, H. Zhang, and B. B. Patel, 2006: An Investigation on Advanced High Strength Steel (AHSS) Spot-Welds at High Speed Impact, Welding Journal, submitted.

13.   Z. Fang, X. Cao, C. Li, H. Zhang, J. Zhang, and H. Zhang, 2006: Investigation of Carbon Foams as Microwave Absorber: Numerical Prediction and Experimental Validation, Carbon, Vol. 44, No. 15. 3368-3370.

14.   H. Zhang, J. Zhang, and H. Zhang, 2006: Microwave Characteristics of a SiC Artificial Crystal, Materials Research Bulletin, Vol. 41, No. 7, 1279-1286.

15.   X. Liu, X. Wang, J. Wang, and H. Zhang, 2006: Effect of Interstitial Hydrogen on Cohesive Strength of Al Grain Boundary with Mg Segregation, J. Mater. Sci. Tech., Vol.22 (2006) 135-138.

16.   H. Zhang, J. Zhang, and H. Zhang, 2006: Numerical Predictions of Radar Absorbing Silicon Carbide Foams by Finite Integration Technique with Perfect Boundary Approximation, Smart Mater. Struct. 15 (2006) 759-766.

17.   B. Wang, C. Hao, J. Zhang, and H. Zhang, 2006: Characterization of Impact Self-Piercing Riveting Process, Chinese Welding Journal, 2006, 27(5):43-46.

18.   B. Wang, C. Hao, J. Zhang, and H. Zhang, 2005: A New Self-piercing Riveting Process and the Joint Strength, Journal of Manufacturing Science and Engineering, May 2006, Volume 128, Issue 2, pp. 580-587.

19.   X. Guo, C. Yang, B. Qian, Q. Xu, and H. Zhang, 2005: Effects of inoculants Ti and Zr on the microstructures and properties of 2219 Al-Cu alloy welds, Acta Metallurgica Sinica, 2005, 41(4): 397-401.

20.   X. Wang and H. Zhang, 2005: On Mg segregation near cracks in resistance spot welds in Al-Mg alloys, Journal of Chinese Electron Microscopy Society, Vol. 24-4, 306.

21.   X. Liu, X. Wang, J. Wang, and H. Zhang, 2005: First-principles investigation of Mg segregation at ∑=11(113) grain boundaries in Al, J. Phys: Condens. Matter, 17 (2005) 4301-4308.

22.   X. Liu, J. Zhang, X. Cao and H. Zhang, 2005: Thermal Expansion and Conductivity of Particulate and Continuous Networked MMCs, Journal of Mechanical Manufacture, Vol. 219, Part B, pp.111-121.

23.   X. Liu, Z. Zou, X. Cao, H. Zhang and J. Zhang, 2004: Current distribution on 3-D SiC networks lead-acid batteries, Chinese Journal of Materials Research, Vol. 18-6, pp. 587-592.

24.   X. Liu, X. Cao, H. Zhang and J. Zhang, 2004: Electrical properties of SiC 3-dimensional network, Chinese Journal of Materials Research, Vol. 18-4, pp. 365-372.

25.   J. Senkara, H. Zhang, and S. J. Hu, 2004: Expulsion Prediction in Resistance Spot Welding, Welding Journal, vol. 83 (4), pp. 123-s to 132-s.

26.   X. Guo, C. Yang, B. Qian, Y. Chang, and H. Zhang, 2004: Pulsed MIG welding process of high strength Al-Cu alloys, Transactions of the China Welding Institution, 2004, 25(4): 5-9.

27.   S. Agashe and H. Zhang, 2003: Selection of Schedules Based on Heat Balance in Resistance Spot Welding, Welding Journal, vol. 82 (7), pp. 179-s to 183-s.

28.   H. Tang, W. Hou, S. J. Hu, H. Zhang, Z. Feng, and M. Kimchi, 2003: Influence of Machine Mechanical Characteristics on RSW Processes and Weld Quality, Welding Journal, vol. 82 (5), pp. 116-s to 124-s.

29.   M. Zhou, H. Zhang, and S. J. Hu, 2003: Relationships Between Quality and Attributes of Spot Welds, Welding Journal, vol. 82 (4), pp. 72-s to 77-s.

30.   H. Zhang, J. Senkara, and X. Wu, 2002: Suppressing Cracking in RSW AA5754 Aluminum Alloys by Mechanical Means, ASME Journal of Manufacturing Science and Engineering, Vol. 124, pp. 79-85.

31.   H. Zhang, M. Zhou, and S. J. Hu, 2001: Impact Strength Measurement and a New Impact Tester, Journal of Mechanical Manufacture, Vol. 215 Part B, pp. 403-414.

32.   J. Senkara, and H. Zhang, 2000: Cracking in Multi-Spot Welding Aluminum Alloy AA5754, Welding Journal, vol. 79 (7), pp. 194-s to 201-s.

33.   H. Tang, W. Hou, S. J. Hu, and H. Zhang, 2000: Force Characteristics of Resistance Spot Welding of Steels, Welding Journal, vol. 79 (7), pp. 175-s to 183-s.

34.   H. Zhang, S. J. Hu J. Senkara, and S. Cheng, 2000: A Statistical Analysis of Expulsion in Resistance Spot Welding, ASME Journal of Manufacturing Science and Engineering, Vol. 122, Aug. 2000. pp. 501-510.

35.   H. Zhang, 1999: Expulsion and Its Influence on Weld Quality, Welding Journal, vol. 78 (11), pp. 373-s to 380-s.

36.   M. Zhou, S. J. Hu, and H. Zhang, 1999: Critical Specimen Sizes for Tensile-Shear Testing of Steel Sheets, Welding Journal, vol. 78 (9), pp. 305-s to 313-s.

37.   S. M. Pickard, H. Zhang, and A. K. Ghosh, 1997: Interface Shear Properties and Toughness of NiAl-Mo Laminates, Acta mater., Vol. 45, No. 10, pp. 4333-4350.

38.   Y-H Hsiao, H. Zhang, and G. S. Daehn, 1996: Effect of Multiaxial Stresses on Creep Damage of 316 Stainless Steel Weldments, Met. Trans. A, Vol. 27A, pp. 891-900.

39.   H. Zhang, P. M. Anderson, and G. S. Daehn, 1994: An Axisymmetric Cylindrical Model for Thermally Induced Stresses and Strains in Continuous Fiber-Reinforced Composites, Met. Trans. A, Vol. 25A, pp. 415-425.

40.   H. Zhang, S. Krishnaswami, P. M. Anderson, and G. S. Daehn, 1993: Yield of Continuous Fiber Composites under Axisymmetric Loading, Scripta Metall. Mater. Vol. 29, pp. 1477-1482.

41.   G. S. Daehn, K. Hebbar, Y. S. Suh, and H. Zhang, 1993: Non-isothermal Deformation Behavior of a High Performance Aluminum Matrix Composite, Composites Engineering, Vol. 3, Nos 7-8, pp. 699-713.

42.   G. S. Daehn, P. M. Anderson, and H. Zhang, 1991: On the Relationship between the Composite Reinforcement Morphology and the Resistance to Thermally Induced Plasticity, Scripta Metall. Mater. Vol. 25, pp. 2279-2284.

43.   H. Zhang, G. S. Daehn, and R. H. Wagoner, 1991: Simulation of the Plastic Response of Whisker Reinforced Metal Matrix Composites under Thermal Cycling Conditions, Scripta Metall. Mater. Vol. 25, pp. 2285-2290.

44.   L. K. Dong, H. Y. Zhang, and C. W. Lung, 1991: Geometric Gauge Theory of Metric Defects, Int. J. Solids Structures, Vol. 28, No. 5, pp. 607-615.

45.   H. Zhang, G. S. Daehn, and R. H. Wagoner, 1990: The Temperature Cycling Deformation of Particle Reinforced Metal Matrix Composites -- A Finite Element Study, Scripta Metall. Mater., Vol. 24, pp. 2151-2155.

46.   L. K. Dong, H. Y. Zhang, and C. W. Lung, 1989: Application of Gauge Theory of Defects to Fracture, Int. J. Solids Structures, Vol. 25, No. 7, pp. 707-713.

 

 

Refereed Conference/Symposium Papers

1.    H. Zhang, B. Wang, and Z. Gan, 2010: Self-piercing Riveting Al Alloys, 6th International Conference on Advances in Production Engineering (APE'10), 17 - 19 June 2010, Warsaw, Poland.

2.      H. Zhang, A. H. Jayatissa, and Z. Gan, 2010: Monitoring Resistance Spot Welding Using Ultrasonic B-scan Techniques, EIT conference, IEEE, 2010, Illinois, May 20-22, 2010.

3.      H. Zhang and B. Wang, 2010: Impact Self-piercing Riveting of Aluminum Alloys, 14th Sheet Metal Welding Conference, Paper 2-2, May 11-14, 2010, Livonia, MI.

4.    A. Shayan, H. Zhang, and Z. Gan, 2010: Quality Test of AHSS Steel Spot Welds Using Ultrasonic Technique, 14th Sheet Metal Welding Conference, Paper 3-2, May 11-14, 2010, Livonia, MI.

5.    B. Patel, A. R. Shayan, and H. Zhang, 2006: Impact Testing of Advanced High Strength Steel (AHSS) Spot-Welds at Various Temperatures, IBAC’06.

6.    F. Sokolowski, X. Liu, X. Su, A. R. Shayan, H. Zhang, K. Herner, and P. Buschke, 2006: Using Ultrasonic Techniques to Validate Resistance Weld Quality of New Automotive Metals, 12th Sheet Metal Welding Conference, May 9 – 12, 2006, Livonia, MI. Paper 8-4.

7.    A. R. Shayan, X. Su, H. Zhang, and B. Patel, 2006: Temperature Effect on Impact Performance of Advanced High Strength Steel (AHSS) Welds, 12th Sheet Metal Welding Conference, May 9 – 12, 2006, Livonia, MI.  Paper 1-6.

8.      G. Karve and H. Zhang, 2004: Dependence of Impact Performance on Process Parameters and Weld Attributes for Spot-welded Advanced High Strength Steels, International Mechanical Engineering Congress & Exposition (IMECE) 2004, American Society of Mechanical Engineers. November 13-19, 2004, Anaheim, California

9.      M. F. Fleming and H. Zhang, 2004: Resistance Welding Quality Monitoring and Process Control, 3rd International Conference on Advances in Production Engineering (APE'04), 17 - 19 June 2004, Warsaw, Poland

10.  J. Senkara and H. Zhang, 2004: Surface Composite Layers Made by Plasma Transferred Arc Welding Technique, 3rd International Conference on Advances in Production Engineering (APE'04), 17 - 19 June 2004, Warsaw, Poland

11.  G. Karve and H. Zhang, 2004: Impact behavior of advanced high strength steel welds, 11th Sheet Metal Welding Conference, May 12 – 14, 2004, Sterling Heights, MI. Paper 5-3

12. C. Jiang, A. K. Thompson, M. F. Shi, S. Agashe, J. Zhang, and H. Zhang, 2003: Liquid Metal Embrittlement in Resistance Spot Welds of AHSS Steels, American Welding Society Annual Convention 2003.  Detroit, Michigan, April 2003. Paper 9A.

13.  S. Agashe and H. Zhang, 2002: Selection of Schedules Based on Heat Balance in Resistance Spot Welding, Sheet Metal Welding Conference X, May. 2002.  Sterling Heights, MI. Paper 5-3.

14.  H. Zhang 2002: Automotive Aluminum Welding: Challenges and Opportunities, Symposium on Advanced Materials Research, Chinese Academy of Sciences, May 2002. Shenyang, China.

15.  H. Zhang and Menachem Kimchi. A New Device for Impact Testing of Spot Welds.  Presented in July 2001 at the International Institute of Welding (IIW) Conference at San Francisco.  Document No. IIW-1181-01.

16.  H. Zhang and J. Senkara Spot Weldability of Aluminum Alloy Sheets. Presented in June 2001, at 2nd International Conference on Advances in Production Engineering at Warsaw, POLAND.

17.  H. Zhang, Spot Weld Impact Testing. (Invited) presented in May 2001, at MetalForm2001 Symposium at Cleveland, OH.

18.  H. Zhang, J. Senkara, and X. Wu, 2000: Suppressing Cracking in Resistance Welding AA5754 By Mechanical Means, International ME2000 Congress & Exposition, Nov. 2000.  Orlando, FL.

19.  S. Cheng, H. Zhang, and S. J. Hu, 2000: Statistics in Welding Research Design and Analysis, Sheet Metal Welding Conference IX, Oct. 2000.  Sterling Heights, MI. Paper 5-5.

20.  W. Li, S. J. Hu, and H. Zhang, 2000: Signal Processing Issues in Resistance Spot Welding, Sheet Metal Welding Conference IX, Oct. 2000.  Sterling Heights, MI. Paper 3-2.

21.  H. Zhang, S.J. Hu, and J. Senkara, 2000: Quality and Testing in Resistance Welding, 4th International Conference on Frontiers of Design and Manufacturing (ICFDM), held in Hangzhou, June 17-19, 2000.

22.  H. Zhang, M. Zhou, S. J. Hu, J. Bohr, and W. H. Trojanowski, 1998: Impact Strength Measurement of Spot Welds, Proc. of Sheet Metal Welding Conference VIII, Oct. 1998.  Sterling Heights, MI., Paper 1-3.

23.  H. Zhang, J. Senkara, and S. J. Hu, 1998: Expulsion Modeling in RSW of Steel and Aluminum Alloys, Proc. of Sheet Metal Welding Conference VIII, Oct. 1998.  Troy, MI., Paper 3-4.

24.  W. M. Faitel, S. J. Hu, and H. Zhang, 1997: Overview of the Intelligent Resistance Welding Program, Proc. of ATP Motor Vehicle Manufacturing Technology Public Workshop, Oct. 28-29, 1997.  Ann Arbor, MI.

25.  H. Zhang, J. Senkara, W-K Hou, and S. J. Hu, 1997: Influence of Mechanical Characteristics of Welding Machines on Expulsion, 1997 Joint ASME/ASCE/SES Summer Meeting, June 30–July 2, 1997.  Chicago, IL.

26.  S. J. Hu, J. Senkara, and H. Zhang, 1996: Quality Definition of Resistance Spot Welds: A Structural Point of View, Proc. of IBEC’96 Body & Engineering, Oct. 1996.  Detroit, MI. pp. 91–98.

27.  H. Zhang, Y. J. Huang, and S. J. Hu, 1996: Nugget Growth in Resistance Spot Welding of Aluminum Alloys, Proc. of Sheet Metal Welding Conference VII, Oct. 1996.  Detroit, MI. Paper No. B3.

28.  H. Zhang, G. S. Daehn, and R. H. Wagoner, 1992: Finite Element Simulation of Thermal Cycling Deformation of Metal Matrix Composites, Proc. of NUMIFORM'92, eds. S. J. -L. Chenot, R. D. Wood, and O. C. Zienkiewicz, A. A. Balkema, Rotterdam, September 7-10, 1992, pp. 199-205, Sophia Antipolis, France.  [Invited]

29.  H. Zhang, G. S. Daehn, and R. H. Wagoner, 1991: Simulating the Superplastic Response of Metal Matrix Composites under Thermal Cycling, Proc. of Computational Mechanics '91, S. N. Atluri, D. E. Beskos, R. Jones, and G. Yagawa, eds., ICES Publications, 1991, pp. 1262-1270.

30.  G. S. Daehn, H. Zhang, Y-C. Chen, and R. H. Wagoner, 1991: Approaches to Modeling the Plastic Deformation of Metal Matrix Composites under Thermal Cycling Conditions, Proc. of Modeling the Deformation of Crystalline Solids:  Physical Theory, Applications, and Experimental Comparisons, T. C. Lowe, A. D. Rollet, P. S. Follansbee, and G. S. Daehn, eds., TMS, 1991, pp. 665-678.

 

 

Books and Book Chapters:

1.               Hongyan Zhang and Jacek Senkara, Resistance Welding: Fundamentals and Applications.  CRC Press/Taylor & Francis Group, Boca Raton, London, New York. ISBN 0-8493-2346-0. 2006. 431 pages, 300 illustrations. Cover     Review (Welding Journal, Nov. 2006)

2.               Welding Handbook (9th ed.), Chapter 2 “Projection Welding”. Prepared with five others for American Welding Society. ISBN: 978-0-87171-053-6. 2007.

3.               Recommended Practices for Automotive Weld Quality - Resistance Spot Welding, AWS/SAE/ANSI Doc. D8.7-2005, 2005. Prepared with J. Bohr for American Welding Society.