Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #1: Fri Sep 28 23:05:52 EDT 2001
    root@toshnik.nonet:/home/src/sys/compile/TS4030CDTD
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134086656 (130944K bytes)
avail memory = 127324160 (124340K bytes)
Preloaded elf kernel "kernel" at 0xc0332000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033209c.
VESA: v2.0, 2560k memory, flags:0x0, mode table:0xc00c806c (c000806c)
VESA: Copyright 1997 TRIDENT MICROSYSTEMS INC.

Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Trident model 9525 VGA-compatible display device> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
intpm0: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f irq 9 at device 5.3 on pci0
intpm0: I/O mapped fe70
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped fe00 
pci0: <unknown card> (vendor=0x11c1, dev=0x0441) at 7.0 irq 3
chip1: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 10.0 on pci0
pcm0: <ESS Technology Maestro-2E> port 0xfc00-0xfcff irq 11 at device 12.0 on pci0
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <3 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pca0 at port 0x40 on isa0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33
acd0: CDROM <CD-224E> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IOMEGA ZIP 100 10.V> Removable Direct Access SCSI-0 device 
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
ltmdm0: <Lucent Win Modem> port 0x1c00-0x1cff,0x2f8-0x2ff mem 0xffefff00-0xffefffff irq 3 at device 7.0 on pci0
ltmdm0: type Virtual 16550A

resumed from suspended mode (slept 22:42:50)
ata0: resetting devices .. done
ata1: resetting devices .. done
pcm0: agg_rdcodec() RW_DONE timed out.
pcm0: will perform cold reset.
usb0: resume detect
umass0: at uhub0 port 1 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <IOMEGA ZIP 100 10.V> Removable Direct Access SCSI-0 device 
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present