HIGH  PRESSURE  UNIT  FOR  BALL BURNISHING

This is a piece of equipment that delivers the high pressure for ball burnishing application.

MODEL:             HGP 4.3

SERIAL NO.:         483

Company:         Ecoroll AG Werkzeugtechnik, Germany

Address:         Hans-Heinrich-Warnke-Strasse 8. D-29227 Celle, Germany

Voltage:                                 480 V, 3 phase

Electric power:                       2.6 kW

Fluid:                                     high-pressure stable, chlorine free, min. 5% concentration

Floor space (length x width):    640 mm x 560 mm

Height:                                    1640 mm

Designation:                             ball burnishing of hardened steel parts (up to 65 HRC)

Machine used:                         CNC Mori Seiki lathe (the unit can work independently and can be

                                                 transported at any machine desired)

Tool served:                             hydrostatic ball-burnishing tool HG 6-9L15° SLK 25

Maximum pressure:                  400 bar (40 MPa, 5800 psi)

Operating:                                pressure adjustment – manual

                                                switch on/off – manual or automatic through M function

Initial attachments:                  rotary union, hoses, fittings

Custom made attachments:     pressure pipes, adapting plate, bracket

Go back to PMMC Homepage or back to PMMC Facilities

or explore furthermore the PMMC Equipments